Foot sealer tunnel

Impulse foot sealer

UL approval, highly reliable and durable impulse foot sealer. AIE brand, the best seller in United States, which represents the finest sealer under strictest quality controls. It provides durable seals for almost any sealable plastic films and bags such as polyethylene (PE), polypropylene (PP), polyvinylchloride (PVC), polyurenthane, polyolefin, pliofilm, Kel-F, polyflex, mylar, P.V.A, Tivac, Saran, Nylo etc. It has sturdy steel, lightweight construction and comes complete with a pedestal, stand, adjustable worktable and foot pedal. Distance between floor and seal is about 31 inches, if you need it taller, extension rod is always available at request. Free hand to improve efficiency. You may choose 2 mm width seal or 5 mm width seal. All work with 110 volts electricity. 220 volts units available upon request. 90 days factory warranty. Please check video link. Besides all above features, double impulse sealers provide heat from both top and bottom sealing jaws. These impulse foot sealers are great for sealing thick materials and gusset bags up to 20 mil. Please check video link

Double Impulse Foot Sealers

Besides all above features, double impulse sealers provide heat from both top and bottom sealing jaws. These impulse foot sealers are great for sealing thick materials and gusset bags up to 20 mil. Please check video link

Double Jaw Foot Sealer with Upper Round Wire-Seal and Cut

• With the help of upper jaw round wire and under jaw 2mm flat wire, this sealer can finish cut and seal at one operation.
• These sealers give the operator a secured seal while eliminating the excess material above the seal.
• Distance between floor and seal is about 31 inches, if you need it taller, extension rod is always available at request.
• This seal and cut impulse impulse sealer can extend its abilities with an additional accessory that allows the sealing head to be adjusted in different sealing angles. If need the accessory, please email us for quote.
• Sealers work with 110 volts electricity.
• Please check video link

Single Jaw Foot Sealer with Cutter

• Head can be adjusted to a 30 degree angle making it perfect for sealing liquid, powders, etc.
• It has an obstruction free throat allowing the use of roll-dispensed material to pack and seal. Also, good for sealing roll bags.
• Equipped with a sliding blade for cutting excess material a quarter inch from seal.
• Distance between floor and seal is about 31 inches, if you need it taller, extension rod is always available at request.
• Sealers work with 110 volts electricity.
• Please check video link

Stainless Steel Single Jaw Impulse Foot Sealer

• Convenient, economical, easy to clean & maintain.
• This impulse foot sealer has an obstruction free throat allowing the use of roll-dispensed material to pack and seal.
• Can be adjustable 30-degree angle making it perfect for sealing liquid, power, etc.
• Distance between floor and seal is about 31 inches, if you need it taller, extension rod is always available at request.
• Sealers work with 110 volts electricity.

Pneumatic Impulse Auto Sealer

The new pneumatic impulse foot sealer is unique, because the actual sealing pressure is now strong ,consistent and controllable.

Helpful in sealing application where time and pressure need to be regulated. These unique sealers are quieter in that the clanging noise found in most other automatic sealers is reduced.

It is automatic sealer with manual operation option. You can set time interval between seals if use at automatic mode.

Outside air compressor is needed. Air usage 4.0 CFM @ 80 PSI. Work with 110 volts electricity.

Pneumatic Constant Heat Auto Sealer

The new pneumatic impulse foot sealer is unique, because the actual sealing pressure is now strong ,consistent and controllable.

The automatic/manual constant sealer is excellent for sealing polycello films, humidity proof cellophane films, polyethylene films, aluminum foil coated bags and guesseted bags. A distinctive 5/8 inch mesh seal makes this sealer ideal for producing wide seals on thick bags.

It is automatic sealer with manual operation option. You can set time interval between seals if use at automatic mode. Temperature up to 390°F.

Outside air compressor is needed. Air usage 4.0 CFM @ 80 PSI. Work with 110 volts electricity.

Adjustable Head Impulse Foot Sealer, AIE brand

Besides all features for impulse foot sealer as described above, sealing head angle can be tilted downward up to 45 degrees. This allows user to bring sealing draw closer to the product. It minimizes the need to constantly lift the product to the sealing draws, increasing production time and reducing user fatigue. This option is ideal for sealing packages of loose contents such as powders, grains, liquids etc. Heavy duty work table can easily support up to 45 pounds item. Its position is adjustable. Sealers work with 110 volts electricity. 220 volts units available upon request.

Constant Heat Sealer with Double Jaw and Beeper

1606-20 Table Top Heat Shrink Tunnel with Optional Stand

• Compact portable light duty shrink tunnel
• With live roller rod conveyor
• Re-circulation air chamber
• Digital temperature control
• AC variable Speed drive Conveyor, adjustable speed up to 30 feet per minute
• Automatic cool down with shut off
• Optional legs and locking casters
• Both 110 volts single phase and 220 volts single phase are available
• Chamber dimension: 20"L x 16"W x 6"H
• Heat tunnel machine can pair with Table top L bar sealer to provide complete seal and shrink packing solution.
• Two years parts warranty.
• Please check 1606-20 Table Top Shrink Tunnel for more information. Click the following links for more detail pictures, heat chamber and conveyor, control panel switches
• Machine weight 220 lbs plus crate weight for shipping. If you need delivery, please email your zip code for freight rate quotation. Please use order form to place your order.

• Fully re-circulating air chamber
• With live roller rod conveyor
• Digital temperature control 0-400°
• Adjustable air velocity control
• State-of-the-art AC variable speed drive conveyor, adjustable speed 0-75 feet per minute
• Chromed conveyor rollers and shaft (no rust)
• Automatic tunnel cool down with shut off
• 1/2 HP blower motor
• Sealed bearings on drive and idler shafts
• Use 220 volts single phase electricity
• Chamber dimension: 28"L x 18"W x 8"H for 1808-28, 28"L x 18"W x 12"H for 1812-28
• Quietest tunnel on the market.
• With lighted viewing window.
• Heats up to 300°F in less than 15 minutes.
• Thermal overload protection on all motors.
• Locking casters with leveling screws.
• Anti-Jam safety features on conveyor.
• It can pair with L bar sealer with stand to provide complete seal and shrink packing solution.
• Two years parts warranty.
• Please check 1808-28 Heat Shrink Tunnel for more information. Click the following links for more detail pictures and available options, control panel switches, more switch, and available options
• Machine weight 450 to 470 lbs plus crate weight for shipping. If you need delivery, please email your zip code for freight rate quotation. Please use order form to place your order.

• Fully re-circulating air chamber
• With live roller rod conveyor
• Digital temperature control 0-400°
• Adjustable air velocity control
• State-of-the-art AC variable speed drive conveyor, adjustable speed 0-75 feet per minute
• Chromed conveyor rollers and shaft (no rust)
• Automatic tunnel cool down with shut off
• 1 HP blower motor
• Sealed bearings on drive and idler shafts
• Use 220 volts three phase electricity
• Chamber dimension: 48"L x 22"W x 8"H for 2208-48, 48"L x 22"W x 12"H inches for 2212-48, 48"L x 22"W x 16"H for 2216-48
• Quietest tunnel on the market.
• With lighted viewing window.
• Heats up to 300°F in less than 15 minutes.
• Thermal overload protection on all motors.
• Locking casters with leveling screws.
• Anti-Jam safety features on conveyor.
• 15 KW heater bank.
• It can pair with L bar sealer with stand to provide complete seal and shrink packing solution.
• Two years parts warranty.
• Please check 2208-48 Series Heat Shrink Tunnels for more information. Click the following links for available options
• Machine weight 600 to 660 lbs plus crate weight for shipping. If you need delivery, please email your zip code for freight rate quotation. Please use order form to place your order.

• Automatic shrink tunnel heat shrink common PVC and POF shrink film.
• 220 Volts 3-phase, 7500 watts
• Tunnel chamber size: 32.7L x 17.7W x 10.2H inches.
• Max packaging weight: 22 lbs
• Machine dimensions: 55.1L x 28.0W x 46.4H inches.
• Temperature control.
• Adjustable speed conveyor can feed up to 10 packages/min.
• One year parts warranty.
• Machine weight 220 lbs. If you need delivery, please email your zip code for freight rate quotation. Please use order form to place your order.

Infrared Heat Shrink Tunnel

L - Bar Sealer and Heat Shrink Tunnel Built in One Combination Machine

• PP-1519 ECMC shrink combo system offers convinient shrink packing solution
• Both 110 volts and 220 volts available at choice
• 15"(W)x19"(L) L bar sealer with micro knife technology and magnetic hold.
• Power discharge conveyor.
• 16"(W)x20"(L)x6"(H) shrink tunnel.
• Tunnel speeds up to 60 feet per minute
• Wok table
• Machine dimension: 76x26x50"
• Production rate: 8-12 per minute.
• Optional curved conveyor is available at extra cost.
• One year parts warranty.
• Please check 1519 Shrink Combo System for more information.
• Machine shipping weight 460 lbs. If you need delivery, please email your zip code for freight rate quotation. Please use order form to place your order.

L - Bar Sealer and Heat Shrink Tunnel Combo System Set

• Puting L bar sealer and hear shrink tunnel together, PP-1622MK shrink combo system offers complete shrink packing solution
• Need 220 volts 1 phase electricity.
• 16"(W)x22"(L) L bar sealer with micro knife technology, magnetic hold and power discharge conveyor.
• Power discharge conveyor automatically feed products to shrink tunnel once the seal complet.
• Easy load film dispenser and work table
• Hole punch pin roll for film perforation
• 18"(W)x28"(L)x8"(H) shrink tunnel (heat chamber size).
• Fully re-circulating air chamber.
• Whole set machine dimension: 104x31x61"
• Optional 180° curved conveyor is available at extra cost.
• One year parts warranty.
• Please check 1622 Shrink Combo System for more information.
• Machine shipping weight 900 lbs. If you need delivery, please email your zip code for freight rate quotation. Please use order form to place your order.

Combination Seal and Shrink Machine

Combination Seal and Shrink Machine with Conveyor

• L bar seal and hot air shink chamber combined in one machine, compact and efficient
• Both 110 volts and 220 volts available at choice for model 48ST
• Only 220 volts available for model 76ST, higher power and higher shrink temperature.
• Magnetic hold for seal and shrink cycle, pinwhell punch to piece vent hole for film. Grates is adjustable to allow more room for taller products.
• Machine dimension for 48ST: 50 (L) x 26 (W) x 45" (H), for 76ST: 56 (L) x 30 (W) x 45" (H)
• One year parts warranty.
• Please check 48ST and 76ST combination machine for more information. Click here for more picture.
• Machine shipping weight 460 lbs. If you need delivery, please email your zip code for freight rate quotation. Please use order form to place your order.

• Can hold tape up to 1" wide. Accommodate both 1" and 3" core. Good for tape up to 1296" or 2592" long.
• Rubber pads bottom. Non-slip weighted base allows quick and easy one-handed operation.
• Black color. Heavy duty. Build in pen holder.
• Click to buy stationary tape

$6.70

Add to cart

• Size: 9x12.5", white color
• Plastic, flat metal clip
• Warehouse and office use.

$18.85

Add to cart

• Most commonly used dispenser for labels
• Working widths up to 4.5 inches. Core diameter 3".
• Place it on the table or save space by mounting it on the wall.
• Peeling off labels is fast and easy.

$34.50

Add to cart

Digital Industrial Shipping Scale

The stainless steel 11.25 x 12 inches platform is designed especially for weighing large and heavy objects. Perfect digital shipping scale for postal, packaging, shipping, manufacturing or industrial requirements. Has easy button: on/Off, Tare and Mode. Comes with a wired remote Large Back-Lit LCD Display. Built-in clock. Measuring units: Pounds / Ounces, Kilograms / Grams. Auto Off feature. 1 9Volt batteries included / 9V A/C adaptor included. Overload indication (EEEE). Can be calibrated follow by the manual. 3 years manufacturer warranty.

• Mode: 56BPB
• Black color
• Max weight capacity 56Lbs
• Sensitivity: 0.1 oz
• Easy button: on/Tare, Off
• Large LCD Display, size: 3 x 2.5"
• Measuring units: Pounds / Ounces, Kilograms / Grams
• Fold-up stand to weigh oversize envelopes and tubes
• Auto Off feature to save battery
• 1.5 Volt x 2 batteries included/ A/C adaptor included
• Dimensions (WxDxH): 8.5" x 8.5" x 2"
• Platform size: 8.5" x 6"

• DigiWeigh DWP-94CAM
• Max weight capacity 30 kg
• Separate displays show unit weight, total weigh, and material count. Each LCD size 2.5x1"
• Stainless steel platform size 11"x7.5"
• Weighing modes: lb / kg
• Built in, rechargeable battery makes the unit portable - a 110 V cord is included for continuous operability.
• 1 year factory warranty.

• Model: DWP-440
• Heavy duty, capable of handling weights up to 400 pounds (200Kg)
• Extremely accurate - Accurate to within just 0.02 lbs (10 grams)
• High quality strain gauge load system, along with an extremely stable stainless steel platform, ensure accuracy is maintained even when loads are placed off-center. The platform measures a comfortable 12x16 inches, so even large loads can be balanced easily.
• The DWP-440 is equipped with an easy to read LCD display with an EL backlight - it's easy to see even in daylight or low lighting conditions.
• Build in, rechargeable battery makes the unit portable - a 110V cord is included for continuous operability.
• Programmable alarm allows the operator to be notified whenever a certain weight is reached
• Easy to use.

• 4' x 4' or 5x5' Base. Suitable for standard pallet sizes. 10000lb or 5000lb x 1lb floor scale.
• Durable platform design withstands heavy Industrial use.
• 200% overload capacity, 100% end-load capacity. Sum capacity of load cells is twice scale capacity.
• All-Structural-Steel construction. Swivel feet help keep scale level on most surfaces.

Features :

• All structural bracing is structured steel channel iron
• Display Converting between Gross and Net Weight
• Auto-Zero Tracking. Overload Indicating Units Switch for Lb/Kg Weighing
• Weigh and Times Accumulating
• Extended Display
• RS-232 Serial Output
• Desk / Wall Mount Swivel Bracket Included
• Optional Internal Rechargeable Battery
• Easy to install. Levels with lugs (no shimming). Easy to relocate. Install above or below ground. Full customizable.