Category: Blogs

Guide to Choose a Heat Sealer

Post author By Durapak Staff
Post date August 1, 2019
No Comments on Guide to Choose a Heat Sealer

Getting your packaging right is very important and your choice of hand sealer is one of the aspects of getting it right. These sealers use heat to create a seal between the two sides of the packaging.

The hand sealer creates an airtight packaging and can preserve the contents inside. There are a few things you need to know in order to make the right choice of a heat sealer. Here are the key aspects you need to know.

Materials that Can be Sealed

Different types of packaging can be sealed using a heat sealer. The type of materials are varied and they can all be sealed with heat sealers. Usually, the type of material used for packaging will determine the heat sealer you would have to use.

Material types are determined by their thickness. The thickness is measured in mils. For example, packaging material between 4 to 8 mils would be considered medium to heavy while 1 to 3 mils is light material. When dealing with heavy packaging material, you will need more heat to seal it than lighter material

Kinds of Sealers

Sealers are typically available in 2 types:

1- Flat Wire

2- Round Wire

The flat wire sealers are made with thick seams and so they are used for thick materials while the round wires have thin seams and are used for thin packaging material. Let’s take a closer look at each of them.

Flat Wire

The flat wire seal is intended for heavy-duty packaging, the thick seam provides reinforcement to ensure what is inside remains in there and is not contaminated. The thick seal offers space to emboss the seal, adding texture and strength to it.

There are however drawbacks to the flat wire seal. The most noticeable one is the fact that it is thick and visible. Another drawback is that you would need a flat wire cutter to remove excess film.

Round Wire Seal

These as we already mentioned are thin and used on thin packaging. Their main advantage is the fact that they look good since they are not easily noticed. It is also possible to cut off the extra film. By applying heat to the seam, a neat look is achieved and the package is secured.

However, it should be noted that since the seam is thin the strength is also not that much. If the product packaged in this material is heavy, the seam may not be able to hold it in. It is also difficult to make secure seams for materials thicker than 3 mils since the wire is too thin for that.

At the end of it all, the products that you intend to package will determine the thickness of the material that you need to use and once you know the packaging material’s thickness, you can go ahead to decide which sealer to use. It is important for your product to be sealed in the right type of material since you would not want it being compromised. Marketers of these seals can also be of assistance when it comes to making the choice of sealer.

Blogs Cable Ties

What You Need To Know About Cable Ties

Post author By Durapak Staff
Post date June 19, 2019
No Comments on What You Need To Know About Cable Ties

Initially designed in 1958 for airplane cable harnesses, secure cable ties uses, and designs have evolved over the years. Today, these ties are used to unclog drains, childproof a house, hand things up and even to pack.

Main categories of cable ties

These are some of the classes of the cable ties. They are classified based on the materials used in making them and their intended purposes.

Natural cable ties

These are made from grade 6.6 nylon these cables. These ties are mostly used for general purpose applications and are resistant to oil-based products and chemicals. Cable ties in this category should meet a specific flammability resistance requirement.

Majority of these cable ties can be adjusted manually. Various tools are specifically designed to reduce installation time.

Uv protected cable ties

Cable ties that fall under this category usually come in black color. They are made from 100% pure plastic material, and these cables ties are very tough and flexible. Application is done either manually or by using processing tools.

These are made of UV-resistant polyamide 6.6 material. This feature makes these cable ties suitable for outdoor uses. They are used in the electronics, automotive, aerospace, wind power, defense, rail, and shipbuilding industries.

Stainless steel ties

Made from grade 316 steel, these are one of the most secure cable ties available in the market. This form of cable ties is most suitable in situations that expose materials to possible high corrosions. Sometimes they come coated with an insulating material; this is necessary when the intended use involves chemicals. It is important to note that they also can withstand extreme temperatures ranging from -73 to +578 degrees.

Releasable cable ties

As the name suggests, these ties are mainly intended to package together items that are intended to be rearranged and repackaged. These are available in tensile strength of between 40 to 50 lbs.
Blank flag identification ties

These ties give users the ability to write on them. Their uses vary from the identification of cables, warning on cables to making wire installations easy.

Besides their intended use of holding cables together and neatly. Over the years these cable ties uses have evolved through the years due to their availability and cost-effectiveness. Some of the ingenious applications of the cable ties include,

Uses in medical procedures, in the medical community the assume the name ‘’lockable polymers clasps”. These ties have been used to hold together pieces of fragmented bones in the event of injuries and open.
Uses in locking luggage. This is done when backpacking, especially with bags that have two zippers. This gives a renewed sense of security.
As seals. In the security industry, some designs of these cables are used as security seals of high-value products, especially when transporting high-value goods and documents.
They can also be used in the general organization of cables and wires. By binding the cables together, neatness is observed this can be suitable in studios that involve a lot of movable wired pieces of equipment.
Cable ties can be of great use in construction sites. Their inexpensive nature makes them ideal to be used to attach shade clothing to scaffolding in construction sites.

Blogs Packaging Materials

Organizing Your Space Using Simple Methods

Post author By Merlyn
Post date June 18, 2019
No Comments on Organizing Your Space Using Simple Methods

There are tons of ways to organize your space –whether its your favorite corner in your home, your office, or even that picnic spot that you have for the day. One of those ways is using a clear box.

To achieve this, you can employ several methods and tricks. These include the use of light or heavy duty metallic boxes, jute boxes, glass boxes, clear boxes, and even reed or papyrus boxes if you have a taste for green materials. All these products vary in cost, which is primarily dictated by the raw materials used and the designs. Its all about getting that space neat, organized, and safe.

Metallic boxes

These are made from a wide range of materials, ranging from steel, aluminum, iron, copper, and even alloys of various metals. They can be used to make safe compartments for money, documents, and other valuable items. They can also be used to keep dangerous tools and equipment safe from possible injury. All forms of metallic boxes are mostly expensive depending on the metals involved, safety or the intended purpose.

Jute boxes

Jute is a naturally occurring material that is tough, flexible, and relatively cheap. To make a box out of jute, you will need a simple metallic frame then some weaving. These boxes can be very appealing and durable. They can be used to create a wide range of products from wine racks, magazine boxes, simple bookshelf, shoe racks, cd drawers the list is endless; it all depends with your imagination and creativity.

Glass boxes

Glass is one of the most inexpensive and readily available materials around. It can be molded into almost anything with exposure to high temperatures. With the application of proper tools and skills boxes of various shapes and sizes can be made out of glass. This material can be used to create bedside compartments to store simple items like medication, money, jewelry, books, and many more.

Clear boxes

These boxes are made from a wide range of products including, polyvinyl chloride (PVC) and Polymethylmethacrylate (PMMA). Clear boxes used are vast they can be used in the following ways

To store and organize baby items such as; toys and clothing.
To store food items such as flour, vegetables, salt, sugar, and kitchen items such as matches handtowels, gloves, and paper towels.
When camping the clear boxes can be used to organize and carry kitchen essentials, clothing, and beddings.
They can be used to store hazardous substances this is due to the fact plastic material does not react with many chemicals.
A properly sealed clear box are a great way of keeping the documents safe, especially in marine environments.
They can come in handy garden sheds to keep items organized and easily accessible.
If you have a sense of creativity, these boxes can be used to come up with colorful decorations by throwing in some colorful boxes in there.
If you love to read just before sleeping, a bedside clear box would be a great idea. The contents are visible and can double up as storage for your favorite items.
Clear boxes can also be a great way to organize your living room. Books, discs, remote controllers, chargers, pens, books, magazines, and newspapers can be organized into clear boxes.

Blogs Shrink Products

Common Shrink Wrap Challenges and How to Avoid Them

Post author By Durapak Staff
Post date June 10, 2019
No Comments on Common Shrink Wrap Challenges and How to Avoid Them

Shrink wrapping is an easy process when you pay attention to key details. Read this article to learn more.

Shrink wrapping is a process that requires two main aspects for it to be successful; you need to have the right kind of wrapping material and of course heat. With the right kind of shrink wrap and a source of heat, you can pack your items. Given that there is no limit on the size of the items you can wrap, you will be able to easily wrap even the bulky items. However, there are also various challenges that come with the wrapping style. It is important to know such challenges when looking for shrink wrapping supplies. Here are some of the problems associated with shrink wrapping.

The Dog Ears

These are observed on the corners of the packaging. They are triangular in shape and while packaging you can see their protrusions at the corners. These triangular protrusions are common and they are caused by a number of factors.

Here are common ways of resolving the issue:

1.Adjust the heat of the shrink gun. Ensure the heat coming out of the gun is enough to wrap your package. Make sure it is also cool so that it cannot damage the package.
2.Check on the shrink tubing. Using a larger film will cause the dog ears to be seen on the corners of the goods. If possible, find a way of reducing the width of the film.
3.Avoid using films of low quality. When you use a low-quality film, it will bend at the corners when you heat the packaging.
4.Have a look at the shape and size of the packaging. If there are irregular shapes, it can cause dog ears when the item will be passed through heat.

Crow’s Feet

They are similar to the dog ears. They are basically the wrinkles found on the corners of the packaging. If you solve the problems of the dog ears, you will also solve the issue of the crow’s feet.

The problem occurs when you use excess film at the corners of the packaging. The best way of resolving the issue is by using a small film.
Failing to heat the packaging can also cause the issue. Always ensure the heating element is producing enough heat which will be used to heat the shrink film in a uniform manner. If you are carrying out the shrinking manually or using the gun, run it across the area twice or more to resolve the issue.

Fish Eyes

They are oval patterns formed when you fail to shrink the packaging properly. They are worse than the dog ears and they can make your product to look unprofessional. The main cause of this problem is the lack of heat. Ensure you have adequate air to heat the products.
It can also be caused by the poor flow of air. If the source of heat is not producing adequate heat, the wrap will not be complete causing the oval patterns.

The existence of the perforations can also cause the issue. Lower the speed of the conveyors to get rid of this effect and make sure there is maximum utilization of the heat.

Using shrink wrapping supplies appropriately is important for good packaging.

Bags Blogs

Infographic: Major Reasons Why Shopping Bags Are A Must For Retail Outlets

Post author By Arthur
Post date May 22, 2019
No Comments on Infographic: Major Reasons Why Shopping Bags Are A Must For Retail Outlets

Retailers are always looking for ways to make their brands more familiar with their target audience. The ambiance of your store and quality of customer service are major factors which create a customer’s perception about you. A shopping bag is one of those items using which you can create lasting relationships with customers. Retail packaging offered by industrial packaging suppliers can extend your relationship with buyers beyond your retail outlet. So, to enhance a buyer’s experience, you will have to focus on aspects like artwork and material.

A shopping bag of high quality provides customers with a unique exposure. You don’t need to spend heavily on foil stamping or embossing if they are beyond your means for creating a lasting impression on buyers. Use Euro shopping bags instead would be a wise decision on your part.

Share this Infographic On Your Site

Please include attribution to Durapak with this graphic. <a href='https://durapak.net/major-reasons-why-shopping-bags-are-a-must-for-retail-outlets/'><img data-lazyloaded="1" src="data:image/gif;base64,R0lGODdhAQABAPAAAMPDwwAAACwAAAAAAQABAAACAkQBADs=" decoding="async" data-src="https://durapak.net/wp-content/uploads/2019/05/durapak-infographic-1.jpg" alt="Shopping Bags" border="0" title="Infographic: Major Reasons Why Shopping Bags Are A Must For Retail Outlets 7" width="700" height="993" /></a>

Blogs Bubble Mailers

Beginners Guide: How to Use Bubble Mailer the Right Way

Post author By Roger Halverson
Post date May 17, 2019
No Comments on Beginners Guide: How to Use Bubble Mailer the Right Way

Check out how to choose the right bubble mailer to avoid damage of shipped items and how to place the items in a secure manner.

It is always a question of how to get an item undamaged to the recipient. Usually, you choose to ship it with courier service or mail for the recipient to collect and enjoy it as soon as possible. There is no sight of worry when you are sending unbreakable products or accessories.

But when it comes to mailing a material-sensitive item, like a watch, mirror, earrings, or even a photo frame, it is time to look for the most efficient mailing package. It should be lighter than a feather, but harder than a rock, so your shipped item is well protected at the lowest mailing cost possible. To save on the packaging material, consider buying bulk bubble mailers to have them on hand each and every time you need to wrap up the delicate items.

The Size

When deciding on the size of the bubble mailer, we tend to think about the larger envelope. But the size matters! You would not want your item flowing freely from one corner of the envelope to the other. It should rather be a tight fit, so the envelope hugs and holds the item in place.

But too small in size, it could tear up at the corners of the bubble mailer while on the way and your shipped fragile item could be damaged or even lost. Always think of the space left within the envelope to be filled with extra protecting material, but to keep the mailing costs at bay.

The Wrapping Process

The reinforced bubble mailer as a protection of your sensitive, breakable item may sound enough.

But think twice. You cannot determine the weather circumstances, driving skills of the mail serviceman, or the handle with care system of the courier.

Prepare your item for the worst case scenario and before you enclose it in the envelope, it is better to wrap it up first in an extra layer of protection, like bubble wrap. This simple, yet robust safety withholds any attempts on damaging your shipped item, no matter the delivering circumstances.

Having bubble mailers keeps you one step ahead. Use a tight embracing bubble mailer to wrap your item first, and insert it into a larger one for the extra strength.

The Right Spot

As mentioned above, the extra room in the bubble envelope makes the mailing of material-sensitive items to last. Always add a handful or two of the loose, impact resistant, cushion-like material, for example, the packing peanuts, to add the extra bottom layer of protection. Place your wrapped item in the middle of your bubble mailer and top it with the packing material to fill in any free space of the envelope.

Close tightly and try to flatten the bubble mailer to cover all the sides of the item with the loose packing material.

The bulk bubble mailers are the best and most cost-efficient choice when it comes to send and deliver delicate, fragile products by mail. They offer lightweight, stronghold, reinforced protection, and when sending your piece wrapped this way, you can be certain and worry less, as your mail will arrive in a perfect condition to its destination.

Blogs Boxes and Cases

Creative Packaging For Retail Store Owners With Pillow Boxes

Post author By Merlyn
Post date May 17, 2019
No Comments on Creative Packaging For Retail Store Owners With Pillow Boxes

Product appeal is primarily determined by the packaging, and in including quality PVC box pillow to your store, there is an enhanced customer attraction, which is the stepping stone to attaining more sales.

One of the toughest decisions for any retail store owner is choosing the right packaging materials that will effortlessly enhance their day to day operations by attracting more clients. In an age where there are limitless options available in the market when it comes to packaging solutions, one can easily be lost for choice. The good news is that you never have to stick to any particular packaging material when you could always go the extra mile by trying out more innovative techniques of product packaging.

In a retail store, the secret to ensuring that the packaging solutions selected will suit the purpose is to focus on the items that you want to package. It is critical to ensure that every item is packaged in a manner which will entice the shopper by giving the product an extra touch of class. The focus on the right packaging becomes doubled when one is shopping for luxurious items or looking to purchase a gift to a loved one. This makes it vital for every retail store owner to find practical ways of capitalizing on shoppers whose interest are on creatively packaged items.

Since there are lots of activities to think about every day, the creative packaging solution to settle on must be simple to use and be able to hold different products. For gift packaging, the use of a box pillow comes as the perfect option which will provide you as the retail store owner, the much-needed flexibility and versatility. This is primarily because the packaging material is pre-tailored to be used for a wide range of small gift items, which makes it a must-have for any store that wants to provide their shoppers with satisfactory solutions.

The best choices when it comes to box pillows are the clear PVC whose greatest strength is their super clarity. These boxes are available in different sizes, which can be customized to suit the intended application, ensuring that your clients have an extra reason to pick several at a go. The clarity makes it simpler for clients to see the packaged quality and ascertain its quality while also appreciating the novel appearance. Pillow boxes are in all evaluations, attention getters that will instantly make the needed difference when it comes to making customers purchase more gift items.

Another advantage that can never be overlooked is their cost-effectiveness, which ensures that retail stores do not have to look for ways to cover the extra operational costs. PVC box pillows are low-budget materials which will make little or no difference to the budget allocations for packaging solutions. This means that every retail store, regardless of size, can embrace these solutions and make them a part of their inventory. It is, in the end, a win-win situation where, on the one hand, the retail store limits the expenditure while on the other hand, they get to attain more sales and enhance their reputation in the local market.

Blogs Boxes and Cases

A Brief Guide —- Nine Things You Should Know about PVC Boxes

Post author By Roger Halverson
Post date May 15, 2019
No Comments on A Brief Guide —- Nine Things You Should Know about PVC Boxes

There are many options when it comes to containers and packages. But the PVC boxes have gained on popularity. Read on to see why.

Everyone uses a packaging medium whether it is a box pillow while you showcase your items in a store or just a simple present to your beloved one. There are many choices as far as the material of a box goes, but the PVC boxes gain on popularity. Here’s how they are the best choice for retail and commercial purposes.

Clear Durability

PVC can be transformed into a clear plastic. Everything you pack in is easy to be seen or shown while protecting the packed piece inside.

Protection

You do not have to be a scientist to understand, that the hard, sturdy clear PVC is one of the best choices when you intend to ship or store any item. It will hold its shape, it will not collapse or bend.

Lightweight

As hard as it might seem, it is very light in weight and cost efficient for shipping. Even while shipping it abroad or overseas will cost you less than any other package designed for transport, while protecting your items.

Food Safe

If you are into food industry you will be happy to use PVC box for displaying solid food. Moreover, it is odor free and gives a clear view. For the catering owners, it is the best choice for displaying the food inside. We really love to see the food and decide on the looks of it.

Cost Efficient

Compared to the production costs of glass or steel boxes, PVC boxes are much less expensive and easier to produce.

Personalized Imprint

These boxes are very easy and inexpensive to be imprinted on, whether with personal messages or the company’s logo or even a small artwork to impress the customer. You can find them manufactured with hanging holes, side handles and a lot more designs. This way you can use them to display in an extensive range of ways without any trouble.

Quality Design

As mentioned above, we do judge a book by its cover. We do not consider only if the item is to our liking but also the package we will carry it in. What better way to showcase your item than in the clear PVC box?

Any Shape You Like

There is no such thing as a specific dimension or a specific shape when it comes to PVC boxes.
While producing a personalized box, you may choose your own height, width, and length as well as shape.

Recycling

There is much talk among scientists, companies, and consumers about the environment and eco-friendly everything. The PVC boxes are reusable and if and when you decide to no longer use them, easy to recycle.

Simply said, using PVC clear box, even as a box pillow is convenient, cost-effective, eco-friendly, and gives you the opportunity to showcase any item in a transparent way. Above all, buying them in bulk is very affordable whether you want to use them for display or for gift purposes, its uses are limitless.

Blogs Packaging Materials

5 Awesome Benefits You Get From Vacuum Packaging

Post author By Catherine Thomas
Post date April 10, 2019
No Comments on 5 Awesome Benefits You Get From Vacuum Packaging

So many different methods are available these days to pack the products that you manufacture. You can choose an option that best fits your requirement depending on the product you wish to buy. The main intention of packing an item is to make it look attractive to potential clients or customers. Some vendors are doing a terrific job when it comes to packing goods while some are still struggling.

One way to pack the items is by using a vacuum heat sealer. The amount that you are going to spend depends primarily on the type of machine you want and the size of the equipment. Some of these devices come with the option to inert or flush gas inside the package.

The main idea behind doing this thing is to increase the shelf life of an item. You may need to purchase external compressors for vacuum sealers that are of commercial grade. High-end models are available, and they can pack upto 300 bags per hour. But, it requires you to invest a lot of money. If your initial production costs are not much, you should pick a vacuum sealer that is for residential use.

There are countless benefits that you will get to enjoy when you use this device. Not many people are aware of these fantastic benefits. Here is a quick list for your reference:

Increase the Shelf Life: One of the best ways to increase the shelf life of certain products is to use vacuum packaging. It can raise the shelf life from 50% – 400% depending on the product and the packaging. If you ensure that the package has the right atmosphere, you can drastically increase its life. Sometimes, you may need to introduce an inert gas or reduce the oxygen levels in the package to achieve this purpose. Vacuum packaging is the best way to preserve the products that go into long-term freezers. Vacuum bags are known to stop products from getting freezer burns. It is the main reason why people use it to preserve meat products.

Reduces Loss to the Company: If you want to reduce the losses to your business, this is the packaging option that you should plan on choosing. You can save a lot of money because your items will stay longer on the shelf. It will eventually increase the bottom line.

No Dust and Dirt: When you use vacuum bags, the products that you place in it besides staying for a pretty long time will also avoid dirt and dust to accumulate on them.

Easy and Quick: Vacuum sealing is something that you can do in minutes if you have proper equipment and machinery in place. You can pack hundreds of products with ease when you pick this option.

Easy to See: Your customers can see the products that you place in the vacuum bags. If you present it well, you can make so much profit as many people will buy it.

These are the benefits that you will for sure get when you use vacuum heat sealer.

Blogs Shipping Supplies

What to Consider with your Shipping Provisions

Post author By Merlyn
Post date March 25, 2019
No Comments on What to Consider with your Shipping Provisions

Selling items online requires you to consider a variety of elements with your provisions. One of the more important aspects of this sector is how you will deliver your products. Wholesale shipping supplies are a key element of any virtual store, as it represents the primary means of getting items to a consumer.

The sale of goods online has become a popular option for many stores across the globe. Whether you have a physical shop that supplements your online sales or operate on an entirely virtual basis – how you provide your services can greatly influence the volume of sales you potentially enjoy. One of the major aspects that impact the quality of your provisions is how you deliver your products to a consumer. It doesn’t matter if you’re only dealing with clients from one region or you offer your goods on a worldwide basis, establishing a reliable shipping solution is crucial to your success.

Though the concept of delivery in itself may seem like a simple enough idea to implement, there are a variety of issues you need to consider. There are different options available with wholesale shipping supplies, for instance, so it’s crucial to study each alternative to determine its viability for your needs. Making the wrong decision can lead to a drop in sales, financial losses, and a tarnished business reputation. Some of the things you should consider when establishing your shipping services include:

Location and Distance

The location of your potential clients is the first thing that should come to mind when looking at the various options available. How far an item has to travel to reach its destination can determine the particular avenue chosen. If a product is traveling overseas, for example, then road transport cannot be implemented with your delivery services.

If part of your services involves a guarantee of delivery within a specific period, then the option chosen should be fast enough to ensure such a promise. You cannot send an item by train, for instance, if you offer same day delivery for people in fairly distant regions.

The Supplies Implemented

How you prepare your items for shipping is crucial in ensuring they reach their destination in one piece. Identifying a reliable supplier of various shipping products is your best shot at providing adequate protection for your wares. The kind of goods being delivered will determine the particular supplies you will need. Acquiring these items in bulk is recommendable when dealing with large volumes of sales regularly.

Cost Effectiveness

How you deliver your products can determine the kind of profits you enjoy. Different options are available at varying costs, depending on the nature of a particular solution. The more reliable and speedy a specific option is, the more expensive it’s likely to be. If you offer free shipping with your products, then choosing a cost-effective alternative is vital to your success.

Safety and Security

The shipping supplies chosen with the delivery of your goods can also impact the level of protection they can enjoy during transportation. If you’re working with delicate or sensitive products, you need to ensure that the supplies you acquire provide an adequate cushion against any external threats.

Share this Infographic On Your Site

Pop top bottle pop top bottle price just reduced by 20%, on sale !!!